Control Valves - Globe & Rotary
Mark One
The Valtek Mark One globe control valve offers superior performance in liquid and gaseous services, while also permitting easy, fast and inexpensive maintenance
Brand: Valtek
Mark Two
Fabricated from bar stock, the Mark Two is an extremely versatile automatic control valve. It is available in many different configurations with short lead times, even in high-pressure classes or special alloys.
Brand: Valtek
Mark Eight
The Valtek Mark Eight control valve features a unique Y-style globe body that provides higher flow capacities and less process turbulence than conventional globe valves.
Brand: Valtek
Compressor Anti-Surge
The Valtek Compressor Anti-Surge Valve from Flowserve represents a revolutionary solution to anti-surge control by combining precise control and exceptional responsiveness in a simple, reliable package.
Brand: Valtek
Mark 100
Designed to meet the needs of large applications. It offers the highest flow capacity, as well as fast, easy maintenance in both gas and liquid control
Brand: Valtek
Mark 200
Designed to accommodate a broad spectrum of trim options, the Mark 200 provides increased control and protection while significantly reducing noise and cavitation
Brand: Valtek
Valtek GS
The Valtek GS is a fully integrated valve-actuator-instrumentation package for a continuous process, non-critical flow loop controlled throughout the plant
Brand: Valtek
CleanFlow
This Valve meets the USDA and 3A requirements and can be supplied for Clean In Place (CIP) and Steam In Place (SIP).
Brand: Kammer
ColdFlow
By using an extended bonnet, the packing, gaskets and seals of ColdFlow valves are protected from cryogenic temperatures, thus ensuring their sealing properties. Optional special gaskets and packing can be used to operate at temperatures as low as -69°C
Brand: Kammer
DrainFlow
Seal welded standard construction
Seat ring designed to fit tank outlet dimensions
Compact and lightweight
Different outlet angle
Fit to the application
Brand: Kammer
FlowTop
The FlowTop control valve is a high-performance, general application valve coupled with the high-thrust FlowAct pneumatic diaphragm actuator. The modular design allows you to use the same body with different types of bonnets, trims and actuators.
Brand: Valtek
FlowTop GS
The FlowTop control valve is a high-performance, general application valve coupled with the high-thrust FlowAct pneumatic diaphragm actuator. The modular design allows you to use the same body with different types of bonnets, trims and actuators.
Brand: Valtek
HpFlow
High pressure applications up to 60,000 psi or PN 4000 for very special needs. With the unique split body design it is possible to clamp the seat in between the body parts to handle these extreme pressure ratings
Brand: Kammer
LinedFlow
Corrosive fluids, including both gases and liquids, require special attention when it comes to the materials used to build the valve. Flowserve has a wide range of plastic lined valves
Brand: Kammer
Mark One - X
The Mark One-X offers a cost-effective means of installing a small valve in a much larger line without line reducers or expanders. It is identical to a standard Mark One except for its body, which has expanded outlets.
Brand: Valtek
Mark One - Three Way
A three-way version of the widely used Valtek Mark One valve, the Valtek Mark One Three-Way valve is used for combining or diverting service
Brand: Valtek
SmallFlow
Kammer SmallFlow micro flow and low flow valves are designed for applications in a Cv range from 0.000063 to 4.7
Brand: Kammer
TotalFlow
Clamped/Retained seat design
High rangeability
Severe Service trim options
Unbalanced or balanced design
Fully NACE compliant
High performance multi-spring diaphragm actuators
Brand: Kammer
Ball Valves
MaxFlo 4
The Valtek MaxFlo 4 eccentric rotary plug control valve is for applications demanding higher rangeability, precise control and higher flow capacity.
Brand: Valtek
ShearStream HP
The Valtek ShearStream is a segmented, ball control valve that provides exceptional control and rangeability for the process industries.
Brand: Valtek
CPT
The CPT Floating Control Ball Valve is a compact rotary control valve in three-piece and flanged design that offers bubble-tight shutoff and throttling control.
Brand: Worcester
Trunnion Mounted Control Ball Valve
Designed to operate at high pressures while minimizing the torque needed to operate the valve. The spring-loaded, process energized seats offer tight (Class IV and Class V) shutoff at any pressure.
Brand: Valbart
18/19, 519, 529, 819, 829
Full Port ball valves designed for ASME B.16.34, General Purpose and specific application requirements combined with seat and seal combinations provide customers with reliability and long service life over a broad pressure range
Brand: Worcester
4, 13/14, 44, 59, 45/459, 599, 70, 71, 74, and 94
A range of 3-piece ball valves designed for ASME B.16.34, General Purpose and specific application requirements combined with seat and seal combinations provide customers with reliability and long service life over a broad pressure range
Brand: Worcester
4-151/301, 51, 52, 53, 54, 55, and 94
Reduced / Regular Port ball valves designed for ASME B.16.34, General Purpose and specific application requirements combined with seat and seal combinations provide customers with reliability and long service life over a broad pressure range
Brand: Worcester
C4, C44, C51 Cryogenic Ball Valve
The Worcester C4, C44, C51 is a 3-piece and flange cryogenic ball valve specifically designed for use on liquid gases such as nitrogen and oxygen. It offers high-performance, shutoff valves for intermittent and continuous flow applications with temperatures to -425°F.
Brand: Worcester
EK71
The Argus EK71 is an end-entry ball valve for the oil and gas industry to prevent losses from production or material leakage. It is designed to meet API-6D, ANSI 16.34 and BS 5351 requirements.
Brand: Argus
FK75C
The FK75C split-body, full-bore, floating ball valve represents the highest standards in valve technology. Its superfine-finished, seat-supported ball is just one of its many important design features. Others include an anti-blow out stem, long-life, double-stem seal system and stem supported in bearings to ensure seals are free from operation loads.
Brand: Argus
FK75M
Argus FK75M is a split body ball valve for the chemical and petrochemical industries with a highly standardized design.
Brand: Argus
FK79
With many innovative design features, the Argus FK79 represents the highest standard in valve technology and is designed to meet API-6D, ANSI 16.34 and BS 5351 requirements.
Brand: Argus
McCanna Cryogenic Ball Valve
The McCANNA Cryogenic Ball Valve is the optimum solution for cryogen flow isolation at temperatures as low as -196°C (-320°F), including LNG liquefaction, transportation and regasification. It is certified fire-safe and meets ISO 15848 standards.
Brand: McCANNA
RSBV
Valbart RSBV Rising Stem Ball Valves are the oil and gas industry’s choice for applications requiring a mechanically energized metal or soft seat to prevent losses from process contamination or material leakage. The are ideal for frequent cycling.
Brand: Valbart
Floating Ball Valve
Top Entry Ball Valves
Floating or trunnion design for inline maintainability
Wedge seat design for less wear and longer life
Stem seal design complying to ISO 15848 Fugitive emission requirements
Special low-torque cryogenic seat profile
Brand: McCANNA
Trunnion Mounted Ball Valves
Top Entry
Valbart top entry ball valves are in-line repairable and ensure bi-directional sealing with two independent floating seats. They feature a double block and bleed, fire safe design and an anti blow-out stem.
Brand: Valbart
Double Block and Bleed
Double Block and Bleed Valve is a side-entry ball valve, with either a bolted or welded body, designed for use in upstream, midstream and downstream oil and gas applications. It requires two in-line isolation valves and a bleed valve used to drain or vent trapped fluid between the two closure elements in order to safely isolate the downstream pipe. This feature can be achieved with one single valves complete with a bleed port between the obturators.
Brand: Valbart
Subsea
The Subsea Trunnion Mounted Ball Valve is a quarter-turn ball valve designed for total reliability against internal and external leaks in shallow and deep-water applications.
Brand: Valbart
VB2 & VB3
The Valbart VB2 and VB3 are repairable, bolted body, side-entry, trunnion-mounted ball valves featuring a fixed ball and floating seat rings. They are compliant with API 6D and 6A.
Brand: Valbart
VW1
The Valbart VW1 is a API 6D-compliant, welded-body valve that seals off both seats at the same time and allows bleeding of the entrapped cavity pressure (double block and bleed) with the ball in the closed position.
Brand: Valbart
Gate Valve
TCSGV
The Valbart TCSGV through conduit slab gate valve is the oil and gas industry’s choice for liquid and gas applications requiring reliable, tight shut-off to prevent leakage and minimize losses from process contamination. It is ideal for pipeline applications requiring pigging capability. Its full-bore design features spring-energized seats and a floating slab gate to ensure both low- and high-pressure sealing capabilities.
Brand: Valbart
Butterfly Valves
BX2001
The Durco Big Max BX2001 high-performance, all-purpose valve is designed for precise throttling control or on-off service with lighter weight piping systems and less expensive, energy-efficient actuators.
Brand: Durco
TX3
The Durco TX3 triple offset butterfly control valve has an elliptical sealing surface that is completely in contact at the final position only, and upon opening, all contact points are released immediately from the seat ring.
Brand: Durco
Learn More
BTV
The BTV Lined Butterfly Valve is a reliable, leak-free service valve designed for a wide range of demanding requirements in corrosive chemical applications and process industries.
Brand: Durco
Pneumatic Actuators
Supernova
Flowserve Automax Supernova series rack and pinion actuators are designed for butterfly, plug, or ball valves, and offer one compact design for double acting and spring return functionality.
Brand: Automax
SXL
SXL Series utilizes a 316 Series stainless steel body and is ideal for use in corrosive environments. The SXL Series is available in both Double Acting and Spring Return versions and with optional polished finishes for sanitary applications.
Brand: Automax
RG
Automax RG Pneumatic Scotch Yoke Actuators are the cost-effective choice for on/off and inching applications of quarter-turn medium-to-large sized valves in the chemical and general process industries.
Brand: Automax
Severe Service Control Valve Solutions
ChanelStream
ChannelStream trim prevents cavitation from forming and minimizes hydrodynamic noise even in the most challenging liquid applications. Staged pressure drops eliminate cavitation by maintaining pressure above the vapor pressure—never allowing cavitation to form.
Brand: Valtek
CavControl
CavControl valve trim lowers cavitation damage by controlling the location and concentration of cavitation vapor bubble implosions in an area away from metal parts. CavControl trim utilizes a number of small, diametrically opposed flow holes through the walls of a special seat retainer.
Brand: Valtek
DiamondBack
DiamondBack trim prevents cavitation from forming and minimizes hydrodynamic noise even in the most challenging liquid applications. Staged pressure drops eliminate cavitation by maintaining pressure above the vapor pressure, never allowing cavitation to form.
Brand: Valtek
CavStream
CavStream valve trim lowers cavitation damage by controlling the location and concentration of cavitation vapor bubble implosion in an area away from metal parts. CavStream trim utilizes a number of small, diametrically opposed flow holes through the walls of a special plug.
Brand: Valtek
Multi-Z
Multi-Z Severe Service control valve handles high-pressure drop applications where entrained solids and cavitation are a problem. Designed for dirty service applications with excessive noise, cavitation, erosion, or high pressure drops.
Brand: Kammer
Sidewinder
SideWinder trim prevents cavitation from forming and minimizes hydrodynamic noise in high pressure drop, low flow applications. Staged pressure drops eliminate cavitation by maintaining pressure above the vapor pressure, so that cavitation never forms.
Brand: Valtek
Erosion Resistant Control Valve
Noise Reduction Control Valves
Survivor
ChannelStream trim prevents cavitation from forming and minimizes hydrodynamic noise even in the most challenging liquid applications. Staged pressure drops eliminate cavitation by maintaining pressure above the vapor pressure—never allowing cavitation to form.
Brand: Valtek
MegaStream
MegaStream control valve trim reduces control valve noise and vibration in a wide range of gas applications. MegaStream works to reduce noise by up to 30 dBa through staging, frequency shifting, attenuation and velocity control.
Brand: Valtek
Stealth
Stealth control valve trim reduces control valve noise and vibration in the most demanding gas applications. Stealth combines new advances in noise control with previously proven technologies to create the most effective device capable of eliminating noise in the most demanding services.
Brand: Valtek
TigerTooth
TigerTooth control valve trim creates multi-staged pressure drops that are effective in reducing noise and vibration in gas services and in eliminating cavitation in liquid services. TigerTooth effectively reduces noise and vibration in gas services by up to 35 dBa through staging, attenuation and velocity control.
Brand: Valtek